[NSRCA-discussion] Lasers

george w. kennie geobet at gis.net
Tue Jan 9 11:14:56 AKST 2007


I demand a recount !!!!


----- Original Message ----- 
From: <jivey61 at bellsouth.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, January 09, 2007 2:48 PM
Subject: Re: [NSRCA-discussion] Lasers


> Georgie
> You're elected.
>
> Jim Ivey
> ----- Original Message ----- 
> From: "george w. kennie" <geobet at gis.net>
> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> Sent: Tuesday, January 09, 2007 2:28 PM
> Subject: Re: [NSRCA-discussion] Lasers
>
>
>> Mike,
>> We need an implementation article in the K-Factor. I need to be able to
>> visualize what's going on with the utilization of the lazer and how it 
>> can
>> improve my time tested methods.
>> G.
>>
>>
>>
>>
>>
>> ----- Original Message ----- 
>> From: "Mike Hester" <kerlock at comcast.net>
>> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>> Sent: Tuesday, January 09, 2007 10:58 AM
>> Subject: Re: [NSRCA-discussion] Lasers
>>
>>
>> >I don't know how I managed to live without my lasers! A string worked
> fine
>> > until my eyes started to go south (gettin close to the big 4-0)
>> >
>> > They sure do make alignment a lot easier in some respects, and
> especially
>> > if
>> > you're building a wood fuse, MAN they are the cat's meow!
>> >
>> > I'm adding some attachments to my jig for wing/stab alignment, and I'm
>> > probably going to get a few more lasers. I really like the ones you 
>> > guys
>> > listed here, and they're cheaper too!
>> >
>> > -Mike
>> >
>> > ----- Original Message ----- 
>> > From: "wgalligan" <wgalligan at goodsonacura.com>
>> > To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>> > Sent: Tuesday, January 09, 2007 10:49 AM
>> > Subject: Re: [NSRCA-discussion] Lasers
>> >
>> >
>> >>I checked mine last night and the right angles are "Dead Nuts On"  The
>> >>pivot
>> >> is not very tight though and would only be useful when the unit is
>> >> resting
>> >> on the table.  The pivot has some lateral movement and would not work
>> >> good
>> >> to transition or project the line upwards.  But I am sure it will be
>> >> worth
>> >> the 20 bucks.
>> >>
>> >> Wayne Galligan
>> >>
>> >>
>> >> ----- Original Message ----- 
>> >> From: "wgalligan" <wgalligan at goodsonacura.com>
>> >> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>> >> Sent: Monday, January 08, 2007 8:21 AM
>> >> Subject: Re: [NSRCA-discussion] Lasers
>> >>
>> >>
>> >>>I just got my Bushnell laser level over the weekend.  It was about 12
>> >>>bucks
>> >>> plus 7 bucks shipping.  It is a nice unit for the money. I'll put it
> to
>> >>> use
>> >>> this week setting the stab on my Inspire.
>> >>>
>> >>> Wayne Galligan
>> >>>
>> >>> ----- Original Message ----- 
>> >>> From: "Ed Alt" <ed_alt at hotmail.com>
>> >>> To: <nsrca-discussion at lists.nsrca.org>
>> >>> Sent: Tuesday, December 19, 2006 6:40 AM
>> >>> Subject: Re: [NSRCA-discussion] Lasers
>> >>>
>> >>>
>> >>>> Your local Radio Shack might have the Bushnell laser level.  It's
>> >>>> really
>> >>>> nice. It puts out a dot or a horizontal line or a crosshair.  You 
>> >>>> can
>> >>>> get
>> >>>> the stab & wings dead nuts on by using the crosshair on the rudder
> post
>> >>>> from
>> >>>> behind.  Someone had an RCU post on this.  For abut $30, these are
>> >>>> really
>> >>>> great.  Got one for my Dad too - they're great around the house for
>> >>>> hanging
>> >>>> pictures and stuff.
>> >>>>
>> >>>> Ed
>> >>>>
>> >>>> ----- Original Message -----
>> >>>> From: "John Konneker" <jlkonn at hotmail.com>
>> >>>> To: <nsrca-discussion at lists.nsrca.org>
>> >>>> Sent: Tuesday, December 19, 2006 7:19 AM
>> >>>> Subject: [NSRCA-discussion] Lasers
>> >>>>
>> >>>>> Thanks for all the great input/suggestions on incidence meters!
>> >>>>> I got so many ideas I decided to try another question.
>> >>>>> In the last K-Factor Mike wrote up a new fuse jig he is using.
>> >>>>> In the article he mentioned a laser level that he found at Lowe's.
>> >>>>> I looked on the Lowe's website, the nearest store is 30 miles away
> (I
>> >>>>> live
>> >>>>> in REAL rural SE Iowa), but couldn't find the model he mentioned.
>> >>>>> Can anyone suggest an affordable laser that projects both vertical
> and
>> >>>>> horizontal lines simultaneously and can be used either on the bench
>> >>>>> top
>> >>>>> or
>> >>>>> mounted on a tripod?
>> >>>>> Thanks!
>> >>>>> John L. Konneker
>> >>>>>
>> >>>>> _________________________________________________________________
>> >>>>> Visit MSN Holiday Challenge for your chance to win up to $50,000 in
>> >>>>> Holiday
>> >>>>> cash from MSN today!
>> >>>>>
> http://www.msnholidaychallenge.com/index.aspx?ocid=tagline&locale=en-us
>> >>>>>
>> >>>>> _______________________________________________
>> >>>>> NSRCA-discussion mailing list
>> >>>>> NSRCA-discussion at lists.nsrca.org
>> >>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> >>>>>
>> >>>> _______________________________________________
>> >>>> NSRCA-discussion mailing list
>> >>>> NSRCA-discussion at lists.nsrca.org
>> >>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> >>>>
>> >>>>
>> >>>
>> >>>
>> >>> _______________________________________________
>> >>> NSRCA-discussion mailing list
>> >>> NSRCA-discussion at lists.nsrca.org
>> >>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> >>>
>> >>
>> >>
>> >> _______________________________________________
>> >> NSRCA-discussion mailing list
>> >> NSRCA-discussion at lists.nsrca.org
>> >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> >
>> > _______________________________________________
>> > NSRCA-discussion mailing list
>> > NSRCA-discussion at lists.nsrca.org
>> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> >
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 



More information about the NSRCA-discussion mailing list