[NSRCA-discussion] Wing adjuster socket material

Wayne Galligan wgalligan at texasairnet.com
Sun Jan 7 16:52:18 AKST 2007


Anthony,

I have an older fiberglass arrow shaft that fit just right.

Wayne Galligan
----- Original Message ----- 
From: "Anthony Romano" <anthonyr105 at hotmail.com>
To: <nsrca-discussion at lists.nsrca.org>
Sent: Saturday, January 06, 2007 4:31 PM
Subject: Re: [NSRCA-discussion] Wing adjuster socket material


> Lance,
> Good ideas. I was leaning toward the dowel thing since the ply seemed
heavy.
> Really like the home made wing socket idea.
> Found Mcmaster-Carr does sell what appear to be the right size for around
$9
> for 40". Found some plastic tubing that some wire rod came in that was the
> right size. I just hope it lasts. Thanks to those who offered there
spares.
>
> Back to the shop
>
> Anthony
>
> >From: "Lance Van Nostrand" <patterndude at tx.rr.com>
> >Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
> >To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> >Subject: Re: [NSRCA-discussion] Wing adjuster socket material
> >Date: Fri, 5 Jan 2007 23:45:39 -0600
> >
> >Anthony,
> >
> >Replacing a wing, eh?  I have been successful in two ways.  The absolute
> >easiest is to drill out a short length of dowel to the right size.  A
> >lighter version of this is to make a "super dowel" by stacking lite ply
and
> >drilling.  Having the grain cross makes it harder.  Another approach is
to
> >find a rod of the same diameter, wrap it with waxed paper and then spiral
> >wrap with 2-4 oz fiberglass that is occasionally dripped with CA (making
a
> >fiberglass tube).  the tube is sliced up to length.
> >
> >All these ideas I have done and work well.
> >
> >--Lance
> >
> >----- Original Message -----
> >From: "Anthony Romano" <anthonyr105 at hotmail.com>
> >To: <nsrca-discussion at lists.nsrca.org>
> >Sent: Thursday, January 04, 2007 9:55 AM
> >Subject: [NSRCA-discussion] Wing adjuster socket material
> >
> >
> > > Hi all,
> > > Where can I find suitable material for sockets for my Gator wing
> > > adjusters?
> > > Have some adjusters but no sockets.
> > >
> > > TIA
> > >
> > > Anthony
> > >
> > > _________________________________________________________________
> > > Get FREE Web site and company branded e-mail from Microsoft Office
Live
> > > http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/
> > >
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >
> >_______________________________________________
> >NSRCA-discussion mailing list
> >NSRCA-discussion at lists.nsrca.org
> >http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _________________________________________________________________
> Dave vs. Carl: The Insignificant Championship Series. Who will win?
>
http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://davevscarl.spaces.live.com/?icid=T001MSN38C07001
>
>


----------------------------------------------------------------------------
----


> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



More information about the NSRCA-discussion mailing list