[NSRCA-discussion] Wing adjuster socket material

[Anthony Romano]

I haven't tried any just went to the main page and searched "phenolic 
tubing". Funny thing is now I can't find any with a 7/32" ID.

Anthony

>From: "Lance Van Nostrand" <patterndude at tx.rr.com>
>Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>Subject: Re: [NSRCA-discussion] Wing adjuster socket material
>Date: Sat, 6 Jan 2007 23:26:41 -0600
>
>The ply idea uses lite ply disks and stacks them.  It is actually quite a
>bit lighter than birch dowel.  I'm interested int he McMaster p/n.
>--Lance
>
>----- Original Message -----
>From: "Anthony Romano" <anthonyr105 at hotmail.com>
>To: <nsrca-discussion at lists.nsrca.org>
>Sent: Saturday, January 06, 2007 4:31 PM
>Subject: Re: [NSRCA-discussion] Wing adjuster socket material
>
>
> > Lance,
> > Good ideas. I was leaning toward the dowel thing since the ply seemed
> > heavy.
> > Really like the home made wing socket idea.
> > Found Mcmaster-Carr does sell what appear to be the right size for 
>around
> > $9
> > for 40". Found some plastic tubing that some wire rod came in that was 
>the
> > right size. I just hope it lasts. Thanks to those who offered there
> > spares.
> >
> > Back to the shop
> >
> > Anthony
> >
> >>From: "Lance Van Nostrand" <patterndude at tx.rr.com>
> >>Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
> >>To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> >>Subject: Re: [NSRCA-discussion] Wing adjuster socket material
> >>Date: Fri, 5 Jan 2007 23:45:39 -0600
> >>
> >>Anthony,
> >>
> >>Replacing a wing, eh?  I have been successful in two ways.  The absolute
> >>easiest is to drill out a short length of dowel to the right size.  A
> >>lighter version of this is to make a "super dowel" by stacking lite ply
> >>and
> >>drilling.  Having the grain cross makes it harder.  Another approach is 
>to
> >>find a rod of the same diameter, wrap it with waxed paper and then 
>spiral
> >>wrap with 2-4 oz fiberglass that is occasionally dripped with CA (making 
>a
> >>fiberglass tube).  the tube is sliced up to length.
> >>
> >>All these ideas I have done and work well.
> >>
> >>--Lance
> >>
> >>----- Original Message -----
> >>From: "Anthony Romano" <anthonyr105 at hotmail.com>
> >>To: <nsrca-discussion at lists.nsrca.org>
> >>Sent: Thursday, January 04, 2007 9:55 AM
> >>Subject: [NSRCA-discussion] Wing adjuster socket material
> >>
> >>
> >> > Hi all,
> >> > Where can I find suitable material for sockets for my Gator wing
> >> > adjusters?
> >> > Have some adjusters but no sockets.
> >> >
> >> > TIA
> >> >
> >> > Anthony
> >> >
> >> > _________________________________________________________________
> >> > Get FREE Web site and company branded e-mail from Microsoft Office 
>Live
> >> > http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/
> >> >
> >> > _______________________________________________
> >> > NSRCA-discussion mailing list
> >> > NSRCA-discussion at lists.nsrca.org
> >> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>
> >>_______________________________________________
> >>NSRCA-discussion mailing list
> >>NSRCA-discussion at lists.nsrca.org
> >>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >
> > _________________________________________________________________
> > Dave vs. Carl: The Insignificant Championship Series. Who will win?
> > 
>http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://davevscarl.spaces.live.com/?icid=T001MSN38C07001
> >
> >
>
>
>--------------------------------------------------------------------------------
>
>
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_________________________________________________________________
Communicate instantly! Use your Hotmail address to sign into Windows Live 
Messenger now. http://get.live.com/messenger/overview