[NSRCA-discussion] Wing adjuster socket material

[Lance Van Nostrand]

Anthony,

Replacing a wing, eh?  I have been successful in two ways.  The absolute 
easiest is to drill out a short length of dowel to the right size.  A 
lighter version of this is to make a "super dowel" by stacking lite ply and 
drilling.  Having the grain cross makes it harder.  Another approach is to 
find a rod of the same diameter, wrap it with waxed paper and then spiral 
wrap with 2-4 oz fiberglass that is occasionally dripped with CA (making a 
fiberglass tube).  the tube is sliced up to length.

All these ideas I have done and work well.

--Lance

----- Original Message ----- 
From: "Anthony Romano" <anthonyr105 at hotmail.com>
To: <nsrca-discussion at lists.nsrca.org>
Sent: Thursday, January 04, 2007 9:55 AM
Subject: [NSRCA-discussion] Wing adjuster socket material


> Hi all,
> Where can I find suitable material for sockets for my Gator wing 
> adjusters?
> Have some adjusters but no sockets.
>
> TIA
>
> Anthony
>
> _________________________________________________________________
> Get FREE Web site and company branded e-mail from Microsoft Office Live
> http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion