[NSRCA-discussion] Header Brace

[wgalligan]

Ditto John,

Just putting the finishing touches on the Fliton Inspire 60.  Nicely built ARF and easy to assemble. 

Wayne Galligan

  ----- Original Message ----- 
  From: John Ferrell 
  To: NSRCA Mailing List 
  Sent: Wednesday, January 03, 2007 2:06 PM
  Subject: Re: [NSRCA-discussion] Header Brace


  There seems to be a growing trend toward smaller airplanes among a lot of folks. I sure am enjoying the 90 size Boxer I bought from Ed Miller last summer. Less hassle to transport, assemble and fly. That means I can fly more!

  John Ferrell    W8CCW
  "My Competition is not my enemy"
  http://DixieNC.US

    ----- Original Message ----- 
    From: Rusty 
    To: NSRCA Mailing List 
    Sent: Wednesday, January 03, 2007 1:02 PM
    Subject: Re: [NSRCA-discussion] Header Brace


    Mike,

    I purchased one based on Claude's rec also.  I chose the YS 63 with the shorty Hatori pipe and header.  Claude should make everyone one of those cool brackets...

    I have not flown the model.

    Rusty Dose
    Team Futaba
      ----- Original Message ----- 
      From: Dr. Mike Harrison 
      To: NSRCA Mailing List 
      Sent: Wednesday, January 03, 2007 10:23 AM
      Subject: Re: [NSRCA-discussion] Header Brace


      Claude 
      I ordered it.
      Mike
        ----- Original Message ----- 
        From: Claude Weimer 
        To: 'NSRCA Mailing List' 
        Sent: Tuesday, January 02, 2007 6:05 PM
        Subject: Re: [NSRCA-discussion] Header Brace


        Hi, Mike

         

        I bought the Oxalys from Kyoshoamerica.com. It is a great kit and for a small airplane it flies pretty good. When I got it and seen the size of it I was afraid the YS 63 may not have enough power but that is not the case. I put the Hatori exhaust on it and the whole package is really slick. There is also an electric version but I'm a four-stroke kind of guy.

         

        Claude

         

         


------------------------------------------------------------------------

        From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dr. Mike Harrison
        Sent: Tuesday, January 02, 2007 11:15 AM
        To: NSRCA Mailing List
        Subject: Re: [NSRCA-discussion] Header Brace

         

        Claude

        Where did you get the 50 Oxalys?

        Mike

          ----- Original Message ----- 

          From: Claude Weimer 

          To: NSRCA-discussion at lists.nsrca.org 

          Sent: Saturday, December 30, 2006 10:15 PM

          Subject: [NSRCA-discussion] Header Brace

           

          I used the Hatori header last season and did not have any problems with it coming loose. I have heard and read of problems on this forum so I bought two of the braces Central sells. The braces I bought from Central must be for a header different than the ones I have, because mine does not have all the holes around the flange. I am building an Impulse and I may have not put a brace on the header, except I have a 50 size Oxalys with the smaller size Hatori header and muffler and header and it came loose on this plane. I really do not like to deal with things coming loose so I decided to do something about it.

           

          I know I am making a short story long so I will get to the point. I made my own brace that is cheap, light, and easy to make. I used some 1/2 x 1/16 aluminum strap I bought at Lowes and a couple bolts. So I thought I would shear it with the forum.

           

          Claude Weimer   


----------------------------------------------------------------------

          _______________________________________________
          NSRCA-discussion mailing list
          NSRCA-discussion at lists.nsrca.org
          http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



------------------------------------------------------------------------


        _______________________________________________
        NSRCA-discussion mailing list
        NSRCA-discussion at lists.nsrca.org
        http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070103/e5cba080/attachment.html