[NSRCA-discussion] Header Brace

John Ferrell johnferrell at earthlink.net
Wed Jan 3 11:03:39 AKST 2007


There seems to be a growing trend toward smaller airplanes among a lot of folks. I sure am enjoying the 90 size Boxer I bought from Ed Miller last summer. Less hassle to transport, assemble and fly. That means I can fly more!

John Ferrell    W8CCW
"My Competition is not my enemy"
http://DixieNC.US

  ----- Original Message ----- 
  From: Rusty 
  To: NSRCA Mailing List 
  Sent: Wednesday, January 03, 2007 1:02 PM
  Subject: Re: [NSRCA-discussion] Header Brace


  Mike,

  I purchased one based on Claude's rec also.  I chose the YS 63 with the shorty Hatori pipe and header.  Claude should make everyone one of those cool brackets...

  I have not flown the model.

  Rusty Dose
  Team Futaba
    ----- Original Message ----- 
    From: Dr. Mike Harrison 
    To: NSRCA Mailing List 
    Sent: Wednesday, January 03, 2007 10:23 AM
    Subject: Re: [NSRCA-discussion] Header Brace


    Claude 
    I ordered it.
    Mike
      ----- Original Message ----- 
      From: Claude Weimer 
      To: 'NSRCA Mailing List' 
      Sent: Tuesday, January 02, 2007 6:05 PM
      Subject: Re: [NSRCA-discussion] Header Brace


      Hi, Mike

       

      I bought the Oxalys from Kyoshoamerica.com. It is a great kit and for a small airplane it flies pretty good. When I got it and seen the size of it I was afraid the YS 63 may not have enough power but that is not the case. I put the Hatori exhaust on it and the whole package is really slick. There is also an electric version but I'm a four-stroke kind of guy.

       

      Claude

       

       


--------------------------------------------------------------------------

      From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dr. Mike Harrison
      Sent: Tuesday, January 02, 2007 11:15 AM
      To: NSRCA Mailing List
      Subject: Re: [NSRCA-discussion] Header Brace

       

      Claude

      Where did you get the 50 Oxalys?

      Mike

        ----- Original Message ----- 

        From: Claude Weimer 

        To: NSRCA-discussion at lists.nsrca.org 

        Sent: Saturday, December 30, 2006 10:15 PM

        Subject: [NSRCA-discussion] Header Brace

         

        I used the Hatori header last season and did not have any problems with it coming loose. I have heard and read of problems on this forum so I bought two of the braces Central sells. The braces I bought from Central must be for a header different than the ones I have, because mine does not have all the holes around the flange. I am building an Impulse and I may have not put a brace on the header, except I have a 50 size Oxalys with the smaller size Hatori header and muffler and header and it came loose on this plane. I really do not like to deal with things coming loose so I decided to do something about it.

         

        I know I am making a short story long so I will get to the point. I made my own brace that is cheap, light, and easy to make. I used some 1/2 x 1/16 aluminum strap I bought at Lowes and a couple bolts. So I thought I would shear it with the forum.

         

        Claude Weimer   


------------------------------------------------------------------------

        _______________________________________________
        NSRCA-discussion mailing list
        NSRCA-discussion at lists.nsrca.org
        http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070103/9d2212bd/attachment.html 


More information about the NSRCA-discussion mailing list