[NSRCA-discussion] Header Brace

[george w. kennie]

My buddy purchased one at the LHS for $229.


  ----- Original Message ----- 
  From: Jay Marshall 
  To: 'NSRCA Mailing List' 
  Sent: Wednesday, January 03, 2007 12:22 PM
  Subject: Re: [NSRCA-discussion] Header Brace


  As 50 sized planes go, it's expensive at ~ $240. I had one with an OS70 - until the radio malfunctioned and it flew off into the wild blue yonder.

   

  -----Original Message-----
  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of William C. Harden
  Sent: Wednesday, January 03, 2007 11:54 AM
  To: 'NSRCA Mailing List'
  Subject: Re: [NSRCA-discussion] Header Brace

   

  Mike,

   

  What is the cost of the plane?  I may be interested.

   

  Bill

   


------------------------------------------------------------------------------

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dr. Mike Harrison
  Sent: Wednesday, January 03, 2007 10:24 AM
  To: NSRCA Mailing List
  Subject: Re: [NSRCA-discussion] Header Brace

   

  Claude 

  I ordered it.

  Mike

    ----- Original Message ----- 

    From: Claude Weimer 

    To: 'NSRCA Mailing List' 

    Sent: Tuesday, January 02, 2007 6:05 PM

    Subject: Re: [NSRCA-discussion] Header Brace

     

    Hi, Mike

     

    I bought the Oxalys from Kyoshoamerica.com. It is a great kit and for a small airplane it flies pretty good. When I got it and seen the size of it I was afraid the YS 63 may not have enough power but that is not the case. I put the Hatori exhaust on it and the whole package is really slick. There is also an electric version but I'm a four-stroke kind of guy.

     

    Claude

     

     


----------------------------------------------------------------------------

    From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dr. Mike Harrison
    Sent: Tuesday, January 02, 2007 11:15 AM
    To: NSRCA Mailing List
    Subject: Re: [NSRCA-discussion] Header Brace

     

    Claude

    Where did you get the 50 Oxalys?

    Mike

      ----- Original Message ----- 

      From: Claude Weimer 

      To: NSRCA-discussion at lists.nsrca.org 

      Sent: Saturday, December 30, 2006 10:15 PM

      Subject: [NSRCA-discussion] Header Brace

       

      I used the Hatori header last season and did not have any problems with it coming loose. I have heard and read of problems on this forum so I bought two of the braces Central sells. The braces I bought from Central must be for a header different than the ones I have, because mine does not have all the holes around the flange. I am building an Impulse and I may have not put a brace on the header, except I have a 50 size Oxalys with the smaller size Hatori header and muffler and header and it came loose on this plane. I really do not like to deal with things coming loose so I decided to do something about it.

       

      I know I am making a short story long so I will get to the point. I made my own brace that is cheap, light, and easy to make. I used some 1/2 x 1/16 aluminum strap I bought at Lowes and a couple bolts. So I thought I would shear it with the forum.

       

      Claude Weimer   


--------------------------------------------------------------------------

      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


----------------------------------------------------------------------------

    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070103/a66d5a68/attachment.html