[NSRCA-discussion] Header Brace

[Jay Marshall]

As 50 sized planes go, it's expensive at ~ $240. I had one with an OS70 -
until the radio malfunctioned and it flew off into the wild blue yonder.
 
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of William C.
Harden
Sent: Wednesday, January 03, 2007 11:54 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Header Brace
 
Mike,
 
What is the cost of the plane?  I may be interested.
 
Bill
 
  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dr. Mike
Harrison
Sent: Wednesday, January 03, 2007 10:24 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Header Brace
 
Claude 
I ordered it.
Mike
----- Original Message ----- 
From: Claude Weimer <mailto:cweimer at tconl.com>  
To: 'NSRCA Mailing List' <mailto:nsrca-discussion at lists.nsrca.org>  
Sent: Tuesday, January 02, 2007 6:05 PM
Subject: Re: [NSRCA-discussion] Header Brace
 
Hi, Mike
 
I bought the Oxalys from Kyoshoamerica.com. It is a great kit and for a
small airplane it flies pretty good. When I got it and seen the size of it I
was afraid the YS 63 may not have enough power but that is not the case. I
put the Hatori exhaust on it and the whole package is really slick. There is
also an electric version but I'm a four-stroke kind of guy.
 
Claude
 
 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dr. Mike
Harrison
Sent: Tuesday, January 02, 2007 11:15 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Header Brace
 
Claude
Where did you get the 50 Oxalys?
Mike
----- Original Message ----- 
From: Claude Weimer <mailto:cweimer at tconl.com>  
To: NSRCA-discussion at lists.nsrca.org 
Sent: Saturday, December 30, 2006 10:15 PM
Subject: [NSRCA-discussion] Header Brace
 
I used the Hatori header last season and did not have any problems with it
coming loose. I have heard and read of problems on this forum so I bought
two of the braces Central sells. The braces I bought from Central must be
for a header different than the ones I have, because mine does not have all
the holes around the flange. I am building an Impulse and I may have not put
a brace on the header, except I have a 50 size Oxalys with the smaller size
Hatori header and muffler and header and it came loose on this plane. I
really do not like to deal with things coming loose so I decided to do
something about it.
 
I know I am making a short story long so I will get to the point. I made my
own brace that is cheap, light, and easy to make. I used some 1/2 x 1/16
aluminum strap I bought at Lowes and a couple bolts. So I thought I would
shear it with the forum.
 
Claude Weimer   

  _____  

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  _____  

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070103/f1b5dbef/attachment.html