[NSRCA-discussion] SPECKTRUM Modules for Futaba and JR

[Xavier Mouraux]

ServoSync and ModelMatch are part of the DX7 TX
program so it won't be available with the modules in
an existing TX with just the module. It is mentionned
somehere on the many pages I have seems yesterday but
I can't find it now.
Still, I have also one JR set on order.

Xavier



--- Ed Alt <ed_alt at hotmail.com> wrote:

> This is great news, I back ordered a JR setup
> already.  As cool as this is, it seems that one
> feature you get with the DX7 would perhaps not be
> available with a module conversion upgrade.   The
> servosynch feature is possibly not there?  I didn't
> see it mentioned anyway.  
> 
> Ed
> 
> ----- Original Message ----- 
>   From: Tony Stillman 
>   To: 'NSRCA Mailing List' 
>   Sent: Thursday, February 22, 2007 11:16 AM
>   Subject: Re: [NSRCA-discussion] SPECKTRUM Modules
> for Futaba and JR
> 
> 
>   Jim:
>   If you go to my site and click on the link, you
> can get more info.  Here is what Specktrum says.
> 
>    
> 
>   2.400 - 2.483 GHz
> 
>   Spectral capacity - 40 Systems
> 
>   Direct Sequence Spread Spectrum
> 
>   DSSS coding gain - 18db
> 
>   Diversity - Multilink: Path, Time and Frequency
> 
>   Module current - 200ma
> 
>   Receiver current - 70ma
> 
>   Receiver voltage range - 3.5 - 9V DC
> 
>   Servo Channel resolution - 1024 with 4X
> oversampling
> 
>    
> 
>   Tony Stillman, President
> 
>   Radio South
> 
>   3702 N. Pace Blvd
> 
>   Pensacola, FL 32505
> 
>   1-800-962-7802
> 
>   www.radiosouthrc.com
> 
>    
> 
> 
>
------------------------------------------------------------------------------
> 
>   From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On
> Behalf Of Jim Woodward
>   Sent: Thursday, February 22, 2007 10:08 AM
>   To: patternrules at earthlink.net; NSRCA Mailing List
>   Subject: Re: [NSRCA-discussion] SPECKTRUM Modules
> for Futaba and JR
> 
>    
> 
>   Tony,
> 
>    
> 
>   Thanks for the post.  Is it known yet that if you
> replace the 1048 PCM module that resolution or speed
> will be lost or gained with the 2.4 system?  I'm
> sure people would not want to gain frequency-freedom
> to have a negative difference between the systems. 
> While I am certainly no 2.4G expert, I can report
> that while at the Miami, FL AMPS IMAC contest Feb
> 10th,11th, I saw one flyer using the Spectrum system
> was "hit" to the point where he landed the plane and
> in-completed the "unknown" round, which is a scoring
> killer for IMAC as the unknown round must be
> counted.  
> 
>    
> 
>   Another pilot used the Spectrum system without any
> problems.  
> 
>    
> 
>   Thanks,
> 
>   Jim W.
> 
> 
>
------------------------------------------------------------------------------
> 
>   From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On
> Behalf Of Steven Maxwell
>   Sent: Thursday, February 22, 2007 11:00 AM
>   To: NSRCA Mailing List
>   Subject: Re: [NSRCA-discussion] SPECKTRUM Modules
> for Futaba and JR
> 
>    
> 
>   I just happened to be on your website and noticed
> you beat me to posting.
> 
>    
> 
>   Steven Maxwell
> 
>    
> 
>    
> 
>     ----- Original Message ----- 
> 
>     From: Tony Stillman 
> 
>     To: Tony Stillman
> 
>     Sent: 2/22/2007 10:47:56 AM 
> 
>     Subject: [NSRCA-discussion] SPECKTRUM Modules
> for Futaba and JR
> 
>      
> 
>     Just to let everyone know, I have the info and
> pricing on the modules on my website.  If anyone
> wants to see the info, go to www.radiosouthrc.com
> and click on SPECKTRUM MODULE INFO on the lower left
> column.  You can also order these from the online
> store or call me and I'll put some on backorder for
> you.  The expected deliver date is 4/10/07.  
> 
>      
> 
>     Tony Stillman, President
> 
>     Radio South
> 
>     3702 N. Pace Blvd
> 
>     Pensacola, FL 32505
> 
>     1-800-962-7802
> 
>     www.radiosouthrc.com
> 
>      
> 
>    
> 
>   CONFIDENTIALITY NOTICE: This e-mail message,
> including any attachments, is for the sole use of
> the intended recipient(s) and may contain
> confidential and proprietary information.  Any
> unauthorized review, use, disclosure or distribution
> is prohibited.  If you are not the intended
> recipient(s), please contact the sender by reply
> e-mail and destroy all copies of the original
> message. 
> 
> 
> 
>
------------------------------------------------------------------------------
> 
> 
>   _______________________________________________
>   NSRCA-discussion mailing list
>   NSRCA-discussion at lists.nsrca.org
>  
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
_______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



 
____________________________________________________________________________________
Have a burning question?  
Go to www.Answers.yahoo.com and get answers from real people who know.