[NSRCA-discussion] Sound proofing a glow engine cowling

[adriancwong at earthlink.net]

Try foam. It will not only absorb some noise, if you install them correctly, it can also re-direct and trap cold air around the cylinder head section, it works on my 160 DZ.

Adrian

-----Original Message-----
>From: Bob Richards <bob at toprudder.com>
>Sent: Feb 21, 2007 8:02 PM
>To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>Subject: Re: [NSRCA-discussion] Sound proofing a glow engine cowling
>
>Magnets, arranged in a circle, and spinning around an armature.
>   
>  ;-)
>  
>
>"R. LIPRIE" <RLIPRIE at centurytel.net> wrote:
>          Whats a good material to cut the noise to use inside the cowling of glow engines?  
>   
>  Matt. L  and Nat Penton
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion