[NSRCA-discussion] Monokote on Monokote

[wgalligan]

If I remember right I believe Bob Pastorello used to have some info on that
very thought.  I think the Windex dries out a little faster.

Wayne

----- Original Message ----- 
From: "Glenn Hatfield" <randy10926 at comtekmail.com>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, February 21, 2007 7:35 AM
Subject: Re: [NSRCA-discussion] Monokote on Monokote


> why not just use an ammonia solution?
>
> --- wgalligan at goodsonacura.com wrote:
>
> From: "wgalligan" <wgalligan at goodsonacura.com>
> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> Subject: Re: [NSRCA-discussion] Monokote on Monokote
> Date: Wed, 21 Feb 2007 07:31:53 -0600
>
> I think if you use the Windex or any window cleaner that has ammonia in it
> that it will make the adhesive set.
>
> Wayne G.
>
> ----- Original Message ----- 
> From: "k6xyz" <k6xyz at sbcglobal.net>
> To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
> Sent: Wednesday, February 21, 2007 12:35 AM
> Subject: Re: [NSRCA-discussion] Monokote on Monokote
>
>
>> Ok....I didn't know it was window cleaner.....I have plenty of windex
>> though...heh.
>> As long as it works better I'll get some...mebby I'll clean the windows
>> too....or not!
>>
>> Hey...are you going to the NATS again?
>> If so, mebby we can do it again and you can stay longer.
>>
>> Regards
>>
>> Dave Harmon
>> NSRCA 586
>> K6XYZ[at]sbcglobal[dot]net
>> Sperry, Ok.
>>
>> -----Original Message-----
>> From: nsrca-discussion-bounces at lists.nsrca.org
>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Lynn Burks
>> Sent: Tuesday, February 20, 2007 11:09 PM
>> To: NSRCA Mailing List
>> Subject: Re: [NSRCA-discussion] Monokote on Monokote
>>
>> Hey old partner:  Yes Cinch a product of Proctor and Gamble ( window
>> cleaner) it seems to attach the monokote glue a little better.  Lynn
>>
>> k6xyz wrote:
>>> Hi Lynn....great to hear from you again!
>>> I've never heard of that stuff but I'll keep it in mind.
>>> Hopefully, the cold weather is done.....I've had enough of that for
>>> awhile...a LONG while.
>>>
>>>
>>> Regards
>>>
>>> Dave Harmon
>>> NSRCA 586
>>> K6XYZ[at]sbcglobal[dot]net
>>> Sperry, Ok.
>>>
>>> -----Original Message-----
>>> From: nsrca-discussion-bounces at lists.nsrca.org
>>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Lynn
>>> Burks
>>> Sent: Monday, February 19, 2007 10:01 AM
>>> To: NSRCA Mailing List
>>> Subject: Re: [NSRCA-discussion] Monokote on Monokote
>>>
>>> Hey Dave: I have used Cinch ( in orange bottle) with good results. Is it
>>> warming up back there yet. Lynn
>>>
>>> k6xyz wrote:
>>>
>>>> I have a bottle of some kind of liquid to attach MK over MK but I've
>>>> never tried it.
>>>>
>>>> Has anyone used it and how did you like it?
>>>>
>>>> Regards
>>>>
>>>> Dave Harmon
>>>> NSRCA 586
>>>> K6XYZ[at]sbcglobal[dot]net
>>>> Sperry, Ok.
>>>>
>>>> -----Original Message-----
>>>> *From:* nsrca-discussion-bounces at lists.nsrca.org
>>>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] *On Behalf Of *Mark
>>>> Atwood
>>>> *Sent:* Sunday, February 18, 2007 2:04 PM
>>>> *To:* NSRCA Mailing List
>>>> *Subject:* Re: [NSRCA-discussion] Monokote on Monokote
>>>>
>>>> Can it be too cold to build???
>>>>
>>>> Windex is definitely the best of those three. I've had very good
>>>> results with even semi large pieces (maybe 4" wide...anything wider
>>>> and I'll typically only do one layer). Don't skimp on the windex. Both
>>>> layers of monokote have to be clean...any dust will show up as a bump
>>>> under the film. I coat both the piece I'm putting down, as well as the
>>>> surface I'm putting it on, with a brush. Spraying it doesn't get
>>>> enough on (unless you go crazy) and just creates a million air bubbles
>>>> rather than a smooth film of liquid. I have it sloppy wet...then slide
>>>> the pieces into position, and I use a small 4" shower squeegee to
>>>> squeeze the windex out. You'll have zero bubbles...and it will adhere
>>>> from suction pretty aggressively. Yes...you'll have a wet mess so a
>>>> few paper towels are in order. Wait at least 24 hours and then use an
>>>> iron set just warm enough to anchor Monokote to Monokote without any
>>>> shrinking.
>>>>
>>>> If you heat it too soon (same day) there's enough moisture still
>>>> trapped between the two layers that you'll vaporize it and cause a
>>>> bazillion bubbles.
>>>>
>>>> -Mark
>>>>
>>>>
>>>> On 2/18/07 12:55 PM, "Ed White" <edvwhite at sbcglobal.net> wrote:
>>>>
>>>> OK, Question for those finding it too cold to build. Is it possible to
>>>> put monokote on top of monokote and get decent results? Tried the poke
>>>> holes and windex/soap methods and not impressed with the results. Any
>>>> other ideas?
>>>>
>>>> Ed
>>>>
>>>> */ORLANDO FRETS <ojfrets at earthlink.net>/* wrote:
>>>>
>>>>
>>>> Temperature in low 30's. It's cold! It's also too cold to build, shop
>>>> is cold. Stay inside where it's warm.
>>>>
>>>>
>>>>
>>>>
>>>> ORLANDO FRETS
>>>>
>>>> ojfrets at earthlink.net
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> NSRCA-discussion mailing list
>>>> NSRCA-discussion at lists.nsrca.org
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> NSRCA-discussion mailing list
>>>> NSRCA-discussion at lists.nsrca.org
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>