[NSRCA-discussion] Monokote on Monokote

[Ken Thompson]

I have done that too, Marty, I've even used the solvent to run around the 
edges on an AEF, worked good.

Ken
----- Original Message ----- 
From: "Martin X. Moleski, SJ" <moleski at canisius.edu>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Monday, February 19, 2007 12:02 PM
Subject: Re: [NSRCA-discussion] Monokote on Monokote


> Ken Thompson wrote:
>
>> Personally I like the Windex method and let it dry overnight, gentle heat 
>> to
>> activate the adhesive and call it good!  The Windex method allows you to
>> reposition the trim for quite a while.
>
> Next day, after the gentle (low) heat application,
> you can also take a Q-tip dipped in trim solvent and
> go around the edges of the trim ONCE.  The solvent
> will wick under the edges and (when dry) will help
> pin them permanently to the surface.
>
> If you go around TWICE, the solvent will dissolve
> the color/glue, which will flow out from underneath
> the trim, stick the Q-tip, and you will produce
> a loose edge that will catch the air and tear the
> trim piece off of the surface.
>
> Don't ask me how I know.  :o(
>
> Marty
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion