[NSRCA-discussion] Monokote on Monokote

[Amir Neshati]

Dido on the Windex method.....No more than 180 ~ 190 degree iron temp &
you'll be fine, so will the Monokote.
 


Amir Neshati 
Realty Executives Of Nevada 

2855 Saint Rose Parkway 
Henderson, Nevada 89052 

Cell:   702-505-3085 
Fax:   702-270-6088 
  
http://www.lasvegasandhendersonhomes.com
<http://www.lasvegasandhendersonhomes.com/>  







 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Scott
Anderson
Sent: Sunday, February 18, 2007 10:01 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Monokote on Monokote


Ed,
 
I have done the Windex way with out problems, floated in place then used a
playing card to smooth out and let dry overnight then used a warm iron over
it..
just my 2 cents..
On the way to the workshop to build and drink beer..
 
Scott a.

----- Original Message ----- 
From: Ed  <mailto:edvwhite at sbcglobal.net> White 
To: ojfrets at earthlink.net ; NSRCA Mailing List
<mailto:nsrca-discussion at lists.nsrca.org>  
Sent: Sunday, February 18, 2007 12:55 PM
Subject: [NSRCA-discussion] Monokote on Monokote

OK, Question for those finding it too cold to build.  Is it possible to put
monokote on top of monokote and get decent results?  Tried the poke holes
and windex/soap methods and not impressed with the results.  Any other
ideas?

Ed

ORLANDO FRETS <ojfrets at earthlink.net> wrote: 

Temperature in low 30's. It's cold! It's also too cold to build, shop is
cold. Stay inside where it's warm.
 
ORLANDO FRETS
ojfrets at earthlink.net
 




  _____  




_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070218/ba705eed/attachment.html