[NSRCA-discussion] Monokote on Monokote

[Scott Anderson]

Ed,

I have done the Windex way with out problems, floated in place then used a playing card to smooth out and let dry overnight then used a warm iron over it..
just my 2 cents..
On the way to the workshop to build and drink beer..

Scott a.
  ----- Original Message ----- 
  From: Ed White 
  To: ojfrets at earthlink.net ; NSRCA Mailing List 
  Sent: Sunday, February 18, 2007 12:55 PM
  Subject: [NSRCA-discussion] Monokote on Monokote


  OK, Question for those finding it too cold to build.  Is it possible to put monokote on top of monokote and get decent results?  Tried the poke holes and windex/soap methods and not impressed with the results.  Any other ideas?

  Ed

  ORLANDO FRETS <ojfrets at earthlink.net> wrote:
    Temperature in low 30's. It's cold! It's also too cold to build, shop is cold. Stay inside where it's warm.

    ORLANDO FRETS
    ojfrets at earthlink.net





------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070218/441e0881/attachment.html