[NSRCA-discussion] 9CAP question

[Michael Cohen]

That worked for me.  FYI, when 7 was selected as the slave to rudder, "link" did not vanish like it did when 2 was the slave to 4.  I wonder why that is?
  ----- Original Message ----- 
  From: CHV69 at aol.com 
  To: nsrca-discussion at lists.nsrca.org 
  Sent: Friday, August 31, 2007 4:24 PM
  Subject: Re: [NSRCA-discussion] 9CAP question


  In a message dated 8/31/2007 5:51:18 P.M. Eastern Daylight Time, precisionaero at comcast.net writes:
    On my 9CAP super, I have ailerons set on channel 1 and 6 using the flaperon function.  Due to having only one "wing function" allowed, I have my independent elevators set to Channel 2 and 7 with the channel 7 slaved to channel 2 100% up, 100% down with "link" and "trim" both set to ON.  Now, when I tried to mix rudder (master) to elevator (slave) for a 3% mix, only channel 2's elevator moved.  I thought having the 2 to 7 mix with "link" and "trim" both set to ON would have allowed both elevator halves to move when rudder is used. 
  You have to set up another mix, Rudder as  master to Channel 7 slave. You may have to use - 3% to get the throw to move the right direction.





------------------------------------------------------------------------------
  Get a sneak peek of the all-new AOL.com.


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070831/482089de/attachment.html