[NSRCA-discussion] Metal Servo Arms

[Stuart Chale]

I have always found them to be the same, but you can usually snug them up
with the screw.  I have only had one that would not go on.

 

Stuart

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of twtaylor
Sent: Thursday, August 30, 2007 8:50 AM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Metal Servo Arms

 

I bought some Hanger 9 alum servo arms and when I put them on they are VERY
hard to get to pull down on to the servo. Is this normal? They don't go down
as far as the plastic arms do. They are stamped with a J on the bottom so I
assume they're made for JR servo's.

 

Tim

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070830/f5f41e59/attachment.html