[NSRCA-discussion] Pro Driver Battery Replacement

[DoWayne Gould]

Thanks for all the tips. I think I am going to check out Battery Space and
put in the largest capacity NiMh cell it will take as per RVP. I only have
one Lipo in a foamy so to keep the support equipment to a minimum I think I
will stick to NiCd or NiMh.

Dowayne

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Pete Cosky
Sent: Sunday, August 19, 2007 10:37 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Pro Driver Battery Replacement

 

I replaced mine with NiMH but you could probably find a Lipo pack from a
foamy that would fit. 

 

I have some LM317 variable voltage regulators that would work for you. All
that is needed are a couple resistors and some solder, all of which I have.

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Mike Hester
Sent: Saturday, August 18, 2007 4:09 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Pro Driver Battery Replacement

I'm in the same boat. I really don't like NiMHs much anymore....I'd really
like a lipo on a regulator, but not sure how it would fit or work...

 

-Mike

 

----- Original Message ----- 

From: DoWayne Gould <mailto:iflyrc24 at gmail.com>  

To: 'NSRCA Mailing List' <mailto:nsrca-discussion at lists.nsrca.org>  

Sent: Saturday, August 18, 2007 3:48 PM

Subject: [NSRCA-discussion] Pro Driver Battery Replacement

 

It seems to be time to replace the battery in my Pro Driver 2 glow plug
lighter. What batteries fit? Should I use NiCd or NiMh? Is there a source
that knows what I need?

TIA Dowayne


  _____  


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070819/ea410625/attachment.html