[NSRCA-discussion] Pro Driver Battery Replacement

[Pete Cosky]

I replaced mine with NiMH but you could probably find a Lipo pack from a
foamy that would fit. 
 
I have some LM317 variable voltage regulators that would work for you. All
that is needed are a couple resistors and some solder, all of which I have.

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Mike Hester
Sent: Saturday, August 18, 2007 4:09 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Pro Driver Battery Replacement


I'm in the same boat. I really don't like NiMHs much anymore....I'd really
like a lipo on a regulator, but not sure how it would fit or work...
 
-Mike
 

----- Original Message ----- 
From: DoWayne Gould <mailto:iflyrc24 at gmail.com>  
To: 'NSRCA Mailing List' <mailto:nsrca-discussion at lists.nsrca.org>  
Sent: Saturday, August 18, 2007 3:48 PM
Subject: [NSRCA-discussion] Pro Driver Battery Replacement


It seems to be time to replace the battery in my Pro Driver 2 glow plug
lighter. What batteries fit? Should I use NiCd or NiMh? Is there a source
that knows what I need?

TIA Dowayne



  _____  




_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070819/a682e6b9/attachment-0001.html