[NSRCA-discussion] Roll in the down line

[Bob Richards]

I had a similar problem years ago, and there was a very small twist in one of the wing panels. Try the incidence meter at the root AND the tip of each wing.
   
  Bob R.
  

rcmaster199 at aol.com wrote:
    Claude, I'd bet that your wing incidences are off. Check and adjust as required and do the same for the stab halves
   
  MattK


-----Original Message-----
From: Claude Weimer <cweimer at tconl.com>
To: 'NSRCA Mailing List' <nsrca-discussion at lists.nsrca.org>
Sent: Thu, 16 Aug 2007 4:50 pm
Subject: [NSRCA-discussion] Roll in the down line


    #AOLMsgPart_3_b2c35feb-f861-407e-b97f-f67ab8269cd7       I am flying a Focus II and I have a slight right hand roll in the vertical down line. I know I can mix it out but I would rather correct it if I could. I don’t have any roll while inverted and I don’t notice any other problems. Any ideas? 
   
  Claude


  
_______________________________________________  NSRCA-discussion mailing list  NSRCA-discussion at lists.nsrca.org  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion  

    
---------------------------------
  AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070817/f19e863f/attachment.html