[NSRCA-discussion] Roll in the down line

[Ken Thompson]

I'm sure I'd be correct in assuming that you've checked your elevators at neutral, to make sure they are equal.  It takes very little to cause a slight roll on a power off downline.
  ----- Original Message ----- 
  From: Claude Weimer 
  To: 'NSRCA Mailing List' 
  Sent: Thursday, August 16, 2007 4:56 PM
  Subject: Re: [NSRCA-discussion] Roll in the down line


  One servo with a pushrod. 

   


------------------------------------------------------------------------------

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ken Thompson
  Sent: Thursday, August 16, 2007 4:55 PM
  To: NSRCA Mailing List
  Subject: Re: [NSRCA-discussion] Roll in the down line

   

  2 elevator servos or 1?

    ----- Original Message ----- 

    From: Claude Weimer 

    To: 'NSRCA Mailing List' 

    Sent: Thursday, August 16, 2007 4:50 PM

    Subject: [NSRCA-discussion] Roll in the down line

     

    I am flying a Focus II and I have a slight right hand roll in the vertical down line. I know I can mix it out but I would rather correct it if I could. I don't have any roll while inverted and I don't notice any other problems. Any ideas? 

     

    Claude


----------------------------------------------------------------------------

    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070816/b25e5e19/attachment.html