[NSRCA-discussion] Engine question

[Claude Weimer]

Check the valve cover gasket. The valve cover acts as a air chamber and
during the cycle there is a vacuum. The vacuum can cause the gasket to suck
in and cause an air leak. 

Claude
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
plachance at cox.net
Sent: Wednesday, August 15, 2007 5:35 PM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] Engine question

Hi all,

Just ran my YS 140L for the first time in many years.  It runs, but after
idling for a while it dies.  It surges a little at idle sometimes.  Is this
a low speed needle issue, pump issue or what?  It has new bearings, diaphram
and gaskets.  Anyone got any ideas?  It did not do this before, but has been
sitting for years.  Bore and all looked perfect when it was apart to replace
the bearings.  Top end sounds smooth and perfect, maybe just a little rich
still.  LOL  Thanks in advance.

Paul LaChance
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion