[NSRCA-discussion] Fuel proofing for gasoline?

[Steve Kessler]

I use Pacer Z-Poxy finishing resin.  I brush it on with a cheap Dubro 
utility brush.

Steve
----- Original Message ----- 
From: "Tom Simes" <simestd at netexpress.com>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, August 07, 2007 12:13 PM
Subject: Re: [NSRCA-discussion] Fuel proofing for gasoline?


> On Tue, 07 Aug 2007 12:17:26 -0400
> rcmaster199 at aol.com wrote:
>
>> Epoxy paint...Klass Kote clear or color works great
>>
>> MattK
>
> Thanks Matt,
>
> I had thought about using epoxy, but not about spraying it on.  I like
> to use clear for fuel proofing so I can see if anything is weeping in
> underneath the coating.
>
> Tom
>
> ======================================================================
>   "Z-80 system stack overflow.  Shut 'er down Scotty, the system's
>         sucking mud" - Error message on TRS 80 Model-16B
>
> Tom Simes                                       simestd at netexpress.com
> ======================================================================
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>