[NSRCA-discussion] 160Dz question
Bob Kane
getterflash at yahoo.com
Tue Aug 7 16:55:19 AKDT 2007
On a broken in 160DZ, my pump is out (leaner) about 1/2-3/4 turn from flush, main needle should like to be 1-1/2 to 1-3/4 turns out.
An APC 17X10 is on the light side for this engine, I use the 18.1X10, a very good combination.
Bob Kane
getterflash at yahoo.com
----- Original Message ----
From: "tocdon at netscape.net" <tocdon at netscape.net>
To: nsrca-discussion at lists.nsrca.org
Sent: Tuesday, August 7, 2007 7:41:16 PM
Subject: Re: [NSRCA-discussion] 160Dz question
Take two, High speed needle out 1/4 , pump out 1/8
Call me in the morning.
-----Original Message-----
From: Ed Deaver <divesplat at yahoo.com>
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
Sent: Sun, 5 Aug 2007 7:55 pm
Subject: [NSRCA-discussion] 160Dz question
Hey everyone. Asking for a friend. We are having problems getting his pump set properly.
Few specifics:
Cool Power 30% heli fuel, Tetra tank, new plumbing, YS foam clunk, APC 17X10 prop, 3500 ft altitude.
On up lines it would sag occasionally, but otherwise ran great (working on the Masters sequence) Turned in (richened up) the pump a tad, better then one more time and the vertical sag stopped, but doing the outside 6sided loop in Advanced, with the bottom of the push, the engine spits and sputters terribly. Strangely, not on any outside pushes in Masters, just this one manuever.
Anythoughts???
Thanx in advance.
ed
Moody friends. Drama queens. Your life? Nope! - their life, your story.
Play Sims Stories at Yahoo! Games.
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
Check Out the new free AIM(R) Mail -- Unlimited storage and industry-leading spam and email virus protection.
____________________________________________________________________________________
Park yourself in front of a world of choices in alternative vehicles. Visit the Yahoo! Auto Green Center.
http://autos.yahoo.com/green_center/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070808/c125489c/attachment.html
More information about the NSRCA-discussion
mailing list