[NSRCA-discussion] Fuel proofing for gasoline?

[Tom Simes]

On Tue, 7 Aug 2007 09:45:54 -0700 (PDT)
Bob Richards <bob at toprudder.com> wrote:

> Tom,
>    
>   I've just used thin epoxy. Keep in mind that you won't have the same
>   type and amount of oil residue that you have with glow operation.
>   You should not have to fuel proof to the extent that you would with
>   a glow plane.
>    
>   BTW, which ARF are you putting together?

I'm putting together the Hangar 9 27% Extra 260

http://www.horizonhobby.com/Products/Default.aspx?ProdID=HAN2750

There are lots of good options in the 50cc field though - it was hard to
choose.  This is my first gasser and there is definately a learning
curve involved in stepping up in size.

Tom
 
======================================================================
   "Z-80 system stack overflow.  Shut 'er down Scotty, the system's
         sucking mud" - Error message on TRS 80 Model-16B

Tom Simes                                       simestd at netexpress.com 
======================================================================