[NSRCA-discussion] 5-Axis CNC work for on Blue Foam????

[rcmaster199 at aol.com]

Jim, send an email to Les Horvath, foamcore at earthlink.net. He may be able to help you.
 
Been using his cores for the past 4 years. His accuracy is the best I have seen and experienced
 
Matt
 
 
-----Original Message-----
From: Jim.Woodward at armorholdings.com
To: nsrca-discussion at lists.nsrca.org
Sent: Tue, 24 Apr 2007 7:34 AM
Subject: [NSRCA-discussion] 5-Axis CNC work for on Blue Foam????


Hi Guys,
 
I’m working on a small project and need some access to a 5-axis CNC cutter that can cut blue foam with out issue.  The raw dimensions of this component are roughly 28” long x 12” wide x 12” tall.  If someone has access to this type of machinery and can do some one-off work that would be used as the base component for a plug, please let me know (of course, this is for R/C models J ).  Reasonable pricing is certainly appreciated too J 
 
Thanks,
Jim W.
 
 
 
CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and proprietary information.  Any unauthorized review, use, disclosure or distribution is prohibited.  If you are not the intended recipient(s), please contact the sender by reply e-mail and destroy all copies of the original message. 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free from AOL at AOL.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070424/aced8f16/attachment-0001.html