[NSRCA-discussion] 210 balancer

[AtwoodDon at aol.com]

after the initial flashing to indicate the number of cells (by the number  of 
lit red leds), the 210V will sporadically flash one or any number of red leds 
 indicating it is discharging that particular cell to bring it in line with 
the  lower cells in the pack(s).  When the charge cycle is done, it may 
continue  to flash intermittently until they all stop flashing.  At that point, the  
cells are all within .05V or each other.  
 
Don
 
In a message dated 4/19/2007 2:37:41 P.M. Pacific Daylight Time,  
robcase1 at cox.net writes:

quick  questions, how do you know on  the 210 when your cells are balanced?
Any best  practices?


_______________________________________________
NSRCA-discussion  mailing  list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


 



************************************** See what's free at http://www.aol.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070419/dd2de4df/attachment-0001.html