[NSRCA-discussion] 2M Pattern Plane For Sale

[ronclark51 at comcast.net]

Hey Larry,
Sure didn't, are you interested?

-------------- Original message -------------- 
From: "Lisa & Larry" <lld613 at psci.net> 

Did you sell this one Ron…?
 



From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of ronclark51 at comcast.net
Sent: Monday, September 04, 2006 11:22 AM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] 2M Pattern Plane For Sale
 
 
TITAN 2M wide body pattern plane. This is a wood prototype of the kit sold by PAC. Scott Dunphy designed and co-built by Scott and myself.  It is in the process of being covered. It should finish at around  10 lbs. It is set up for a YS and has a CF nose ring and a Hyde clone mount. It has fixed bolly gear, bolly wheel pants, and plug in wings w/ carbon fiber tube, plug in adjustable stab, pull-pull on rud., a c.f. push rod and bell crank on elev.  The wings are extremely strong and lite (13.8 oz ea. covered) w/ carbon fiber vail between the balsa and foam. Approx. 60% covered with red and yellow mono-kote .
 
Plane bare- $450.00 shipped in the lower 48 US 
 
W/ new servo  Rud. JR DS8411 add $65.00
W/new, Elev. Servo  JR DS 8231 add  $65.00, 
W/ two new Futaba S9150s for Ailerons  add $120.00
 
E-Mail ronclark51 at comcast.net for pictures 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060926/d2ce0f17/attachment.html 
-------------- next part --------------
An embedded message was scrubbed...
From: "Lisa & Larry" <lld613 at psci.net>
Subject: Re: [NSRCA-discussion] 2M Pattern Plane For Sale
Date: Mon, 25 Sep 2006 23:45:06 +0000
Size: 714
Url: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060926/d2ce0f17/attachment.mht