[NSRCA-discussion] gluing foam to fiberglass

[Fred Huber]

If its just to keep padding in place...  lightly sand the surface of the 
fiberglass and the 77 will work.  Also "Gorrilla Glue" or a light coating of 
epoxy (if its epoxy based fiberglass... unsure of poly resin) will work. 
White or yellow glue would peel free in a short time.

I've not glued foam rubber or other spongy foams to fiberglass for anything 
other than to just help keep padding from shifting.

----- Original Message ----- 
From: "JShulman" <jshulman at cfl.rr.com>
To: "NSRCA" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, September 20, 2006 3:51 PM
Subject: [NSRCA-discussion] gluing foam to fiberglass


> Has anyone ever glued foam (like YS motor box foam, not white beaded foam)
> to fiberglass before? If so, what glue did you use? Or, does anyone know 
> if
> Spray 77 would hold the foam to fiberglass?
>
> Regards,
> Jason
> www.jasonshulman.com
> www.shulmanaviation.com
> www.composite-arf.com
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.12.5/451 - Release Date: 9/19/2006
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.12.5/451 - Release Date: 9/19/2006
>
>