[NSRCA-discussion] For Sale

[Daniel J. Hamlett]

I have a Composite ARF Revolution Pro that I would like to sell.  It is 
set up as follows.

Jason Schulman color scheme 2M Revolution Pro
YS 1.40
ES carbon pipe for YS 1.40
Header from central (5/8" inside dia.)
Carbon Spinner
Carbon Gear
Servos are as follows
  Ail - DS8411SA (1 in each wing)
  Elv - DS3421SA (1 mounted in each hor stab)
  Rudder - DS8611 (pull pull)
  Thr Hitch mini high speed.
Tetra tank (20oz)
Fromeco 4800 7.4v 2p2c pack
Perfect switch and regulator (5.7v)
all hardware is tetra hardware except push rods (hanger 9 titanium)
Mejzlik 17x10 (will tach 8600 rpm, I run it at 8450rpm)

The plane has less than 40 flight on it.  I built it to have as a backup 
to my primary 2M plane.  Lost interest in comp so I dont need two planes 
anymore.  The plane flys flawlessly.  Never crashed.  You will not be 
dissapointed.  The Plane is very light though I have never put it on a 
scale.  References are available for condition of plane

Local pick up/delivery only.  I will drive a reasonable distance to meat 
you 200 miles or half way.  I am from the Springfield MA area.

$3000.00 or BRO

Pleas respond off list

Pictures available upon request.

Thanks

Dan

PS.  It currently has a JR S649 RX in it.  If you fly with a 10X,  I can 
give you the prgm for the plane as well.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060903/79fb8940/attachment.html