<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#3333ff">
I have a Composite ARF Revolution Pro that I would like to sell. It is
set up as follows.<br>
<br>
Jason Schulman color scheme 2M Revolution Pro<br>
YS 1.40<br>
ES carbon pipe for YS 1.40<br>
Header from central (5/8" inside dia.)<br>
Carbon Spinner<br>
Carbon Gear<br>
Servos are as follows<br>
Ail - DS8411SA (1 in each wing)<br>
Elv - DS3421SA (1 mounted in each hor stab)<br>
Rudder - DS8611 (pull pull)<br>
Thr Hitch mini high speed.<br>
Tetra tank (20oz)<br>
Fromeco 4800 7.4v 2p2c pack<br>
Perfect switch and regulator (5.7v)<br>
all hardware is tetra hardware except push rods (hanger 9 titanium)<br>
Mejzlik 17x10 (will tach 8600 rpm, I run it at 8450rpm)<br>
<br>
The plane has less than 40 flight on it. I built it to have as a
backup to my primary 2M plane. Lost interest in comp so I dont need
two planes anymore. The plane flys flawlessly. Never crashed. You
will not be dissapointed. The Plane is very light though I have never
put it on a scale. References are available for condition of plane<br>
<br>
Local pick up/delivery only. I will drive a reasonable distance to
meat you 200 miles or half way. I am from the Springfield MA area.<br>
<br>
$3000.00 or BRO<br>
<br>
Pleas respond off list<br>
<br>
Pictures available upon request.<br>
<br>
Thanks<br>
<br>
Dan<br>
<br>
PS. It currently has a JR S649 RX in it. If you fly with a 10X, I
can give you the prgm for the plane as well.<br>
<br>
<br>
</body>
</html>