[NSRCA-discussion] Hole Punch

[Nat Penton]

Jerry
I need a hand operated hole punch for light duty work -  paper, thin ply, colored tape, maybe thin aluminum, etc etc 
                                              Nat
  ----- Original Message ----- 
  From: Jerry Stebbins 
  To: NSRCA Mailing List 
  Sent: Friday, September 01, 2006 1:07 PM
  Subject: Re: [NSRCA-discussion] Hole Punch


  Nat, depending on what you are "punching" you might try using hard brass tubing, sharpen the edge and find a hammer to fit.
  :) Jerry
    ----- Original Message ----- 
    From: Nat Penton 
    To: NSRCA Mailing List 
    Sent: Thursday, August 31, 2006 11:16 PM
    Subject: [NSRCA-discussion] Hole Punch


    I would like to find one that goes up to 5/16 or 3/8" and has four or more sizes.                 Thanks   Nat


----------------------------------------------------------------------------


    Internal Virus Database is out-of-date.
    Checked by AVG Free Edition.
    Version: 7.1.405 / Virus Database: 268.11.4/424 - Release Date: 8/21/2006



----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  Internal Virus Database is out-of-date.
  Checked by AVG Free Edition.
  Version: 7.1.405 / Virus Database: 268.11.4/424 - Release Date: 8/21/2006
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060901/594b21bf/attachment.html 
-------------- next part --------------
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.11.4/424 - Release Date: 8/21/2006