[NSRCA-discussion] Hole Punch

[Jerry Stebbins]

Nat, depending on what you are "punching" you might try using hard brass tubing, sharpen the edge and find a hammer to fit.
:) Jerry
  ----- Original Message ----- 
  From: Nat Penton 
  To: NSRCA Mailing List 
  Sent: Thursday, August 31, 2006 11:16 PM
  Subject: [NSRCA-discussion] Hole Punch


  I would like to find one that goes up to 5/16 or 3/8" and has four or more sizes.                 Thanks   Nat


------------------------------------------------------------------------------


  Internal Virus Database is out-of-date.
  Checked by AVG Free Edition.
  Version: 7.1.405 / Virus Database: 268.11.4/424 - Release Date: 8/21/2006



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060901/5d596414/attachment.html