[NSRCA-discussion] Partner set-up question

[Claude Weimer]

Thanks for the effort Tom. I will tell you what I'm doing. A guy in our
group has a Genesis ARF and it does some weird things in knife edge. I think
the Genesis is a Partner copy and I want to see if the setup is the same.
Another one in our group is going to build a Genesis this winter and if the
Partner is set up different he is going to set it up like the Partner.
Roberts's plane, the guy with the Genesis ARF, will tuck to the gear and
roll right with left rudder. It is not as bad with the right rudder. The
guys in Chicago have Genesis and some are having problems also. So I thought
it would be interesting to compare the two planes. Thanks again, Claude.

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Koenig, Tom
Sent: Tuesday, October 17, 2006 5:17 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Partner set-up question

 

Hello Claude and all,

 

These are the measurements I came up with. Please-if anyone has other data
it would be interesting to compare. First up nothing earth shattering as far
as the numbers are concerned. Quite standard actually.

 

Partner

 

With reference to the canopy floor.

 

Datum line/spinner center    56 mm below canopy line

wing center                        92 mm below canopy line( or 36 mm below
datum line)

stab center                        63 mm below canopy line( or 7 mm below
datum line)

 

 

Lazulite

 

With reference to the canopy floor.

 

Datum line/spinner center    56 mm below canopy line

wing center                        90 mm below canopy line( or 34 mm below
datum line)

stab center                       57 mm below canopy line( or 1 mm below
datum line)

 

I presume that with the stab center on the Lazulite, I may have made an
error in measurement and that the stab is actually located ON the datum
line( it was getting late!)

 

 

The models are actually very similar, with a bit of coaxing the Lazulite
Canopy will fit on a Partner and vice versa.

 

I have not compared 1/4 chord to 1/4 chord moments-but if these are wanted
I'll measure that up as well.

 

The Lazulite was disgustingly close ( by millimeters) to my own Merlin
design.I'm still kicking myself for the cash that was 'burnt'.

 

Hope it is of help.

 

 

Tom

 

 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Claude Weimer
Sent: Tuesday, 17 October 2006 8:52 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Partner set-up question

Tom,

 

No one else has responded.  I would really appreciate if you could give me
the information. I can deal with metrics if that's what you use. 

 

Thanks, Claude

 

 


  _____  


From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Koenig, Tom
Sent: Monday, October 16, 2006 4:20 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Partner set-up question

 

Claude,

 

Have you had any answers yet?

 

If not-I'll measure up my unbuilt one and see what the numbers are. I hope
they will make sense with the results from others?

 

Tom

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Claude Weimer
Sent: Monday, 16 October 2006 12:53 PM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Partner setup question

Can some one tell me the distance below the engine thrust line to the
centerline of the wing on the Partner? And I would also like to know the
distance above the wing centerline to the center of the horizontal stab.
Thanks, Claude. 


************************************************************************
*PLEASE NOTE* This email and any attachments may
be confidential. If received in error, please delete all 
copies and advise the sender. The reproduction or 
dissemination of this email or its attachments is 
prohibited without the consent of the sender.

WARNING RE VIRUSES: Our computer systems sweep
outgoing email to guard against viruses, but no warranty 
is given that this email or its attachments are virus free. 
Before opening or using attachments, please check for 
viruses. Our liability is limited to the re-supply of any 
affected attachments.

Any views expressed in this message are those of the 
individual sender, except where the sender expressly,
and with authority, states them to be the views of the 
organisation.
************************************************************************

 

************************************************************************
*PLEASE NOTE* This email and any attachments may
be confidential. If received in error, please delete all 
copies and advise the sender. The reproduction or 
dissemination of this email or its attachments is 
prohibited without the consent of the sender.

WARNING RE VIRUSES: Our computer systems sweep
outgoing email to guard against viruses, but no warranty 
is given that this email or its attachments are virus free. 
Before opening or using attachments, please check for 
viruses. Our liability is limited to the re-supply of any 
affected attachments.

Any views expressed in this message are those of the 
individual sender, except where the sender expressly,
and with authority, states them to be the views of the 
organisation.
************************************************************************
	
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061018/edd4874a/attachment.html