[NSRCA-discussion] New maneuver for Masters or FAI

[Richard Strickland]

THERE was a pilot!
 
RS

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Dean Pappas
Sent: Tuesday, October 03, 2006 12:26 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] New maneuver for Masters or FAI


Back when Leo Loudenslager did something similar in airshows, he called it a
computer roll.
Dean
 
 

Dean Pappas 
Sr. Design Engineer 
Kodeos Communications 
111 Corporate Blvd. 
South Plainfield, N.J. 07080 
(908) 222-7817 phone 
(908) 222-2392 fax 
d.pappas at kodeos.com 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Gray E Fowler
Sent: Tuesday, October 03, 2006 9:54 AM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] New maneuver for Masters or FAI



I just went to the Fort Worth airshow and I saw a maneuver that is so cool
that some class above me needs to adopt it. 
I am going to try to remember how it went.....it is a 4 point roll 


from straight flight 

3/4 roll right to knife edge (belly of the plane) 
5/4 roll left to inverted 
3/4 roll right to knife edge (top of the plane) 
5/4 roll to upright. 

Anyone ever see this and does it have a name. I may have gotten it slightly
wrong, as it took me by surprise. It was Frank Ryder and the Oreck vacuum
cleaner powered plane-Cyclone.


Gray Fowler
Senior Principal Chemical Engineer
Radome and Composites Engineering
Raytheon

-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 4780 bytes
Desc: not available
Url : http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061003/c39ffc9f/attachment.bin