[NSRCA-discussion] Brio Hinges
White, Chris
chris at ssd.fsi.com
Wed Nov 15 13:32:27 AKST 2006
Hey Dave,
So were Atwood's as hot as I've always heard???? Shoot the only thing around in late 60's -70's were Cox'. I haven't even tried the Norvell's ...have you? Small....man we used to have a ball with a Cox .010 powered littlest stick with the Ace pulse single channel. We're talkin cheap R/C thrills now:-)
Chris
________________________________
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of k6xyz
Sent: Wednesday, November 15, 2006 4:13 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Brio Hinges
Hey Chris....mine were Snappers with Atwood Shrieks.....clear nitrate over paper.
Regards
Dave Harmon
NSRCA 586
K6XYZ[at]sbcglobal[dot]net
Sperry, Ok.
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of White, Chris
Sent: Wednesday, November 15, 2006 12:09 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Brio Hinges
Hey Bob,
I Aero-glossed mine....(orange...best flying ½ A stunter I had flown...) but you should have seen me doing a "Lil Satan" in transparent blue monokote for my cousin:-)
Oh, the smells of Aero-Gloss....God only knows how many brain-cells I paid for that experience:-)
Chris
________________________________
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bob Richards
Sent: Wednesday, November 15, 2006 11:40 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Brio Hinges
Reminds me of the first time I used Monokote. I was attempting to cover a Goldberg Li'l Jumpin Bean. My Mom's iron was almost as big as the plane!!!
IIRC, the instructions said to set the iron for "permanent press". :-)
Back then (1969??) the Monokote instructions actually showed a regular iron.
Solarfilm was a lot easier to use, but did not add much stiffness to a wing.
Bob R.
Dean Pappas <d.pappas at kodeos.com> wrote:
'Bout the mid-late sixties, I can remember Mom showing Dad and myself how to monokote a corner properly,
before we figured out that working with a clothes iron would build strong muscles!
Seems she was frustrated watching us mess up.
Dean
Dean Pappas
Sr. Design Engineer
Kodeos Communications
111 Corporate Blvd.
South Plainfield, N.J. 07080
(908) 222-7817 phone
(908) 222-2392 fax
d.pappas at kodeos.com
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of wgalligan
Sent: Wednesday, November 15, 2006 10:59 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Brio Hinges
I was around then. Didn't invent It though. I did get chewed out for using
my wife's iron to apply Mono-Cote and Cover All.
WAYNO
----- Original Message -----
From: "Amir Neshati"
To: "'NSRCA Mailing List'"
Sent: Tuesday, November 14, 2006 10:24 PM
Subject: Re: [NSRCA-discussion] Brio Hinges
> Nat, Monokote hinges were used before your time...You probably aren't old
> enough to remember, in the olden days, around the late '70s & '80s,
> Monokote
> used to include instructions on how to do Monokote hinges .....Wayno was
> around then though, I think he invented the film covering.
>
> Amir
>
>
>
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Nat Penton
> Sent: Tuesday, November 14, 2006 10:02 AM
> To: NSRCA Mailing List
> Subject: Re: [NSRCA-discussion] Brio Hinges
>
> Arch
> Is this for top hinged ails only ? Nat
>
> ----- Original Message -----
> From: "Archie Stafford"
> To: "'NSRCA Mailing List'"
> Sent: Tuesday, November 14, 2006 8:27 AM
> Subject: Re: [NSRCA-discussion] Brio Hinges
>
>
>> Nat,
>>
>> Basically after beveling the surface I put a strip about 1" over the top
>> sealing the gap and holding it in place. Flip the aileron up and then
>> put
>
>> a
>> piece on the bottom. Then just cover the entire wing and you end up with
>> an
>> incredibly clean finish on top.
>>
>> Arch
>>
>>
>> -----Original Message-----
>> From: nsrca-discussion-bounces at lists.nsrca.org
>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Nat Penton
>> Sent: Monday, November 13, 2006 10:56 PM
>> To: NSRCA Mailing List
>> Subject: Re: [NSRCA-discussion] Brio Hinges
>>
>> Archie
>> How do you "do" monocote hinges ? Nat
>>
>> ----- Original Message -----
>> From: "Archie Stafford"
>> To: "'NSRCA Mailing List'"
>> Sent: Monday, November 13, 2006 10:18 AM
>> Subject: Re: [NSRCA-discussion] Brio Hinges
>>
>>
>>> Personally I use Monokote hinges...I know everyone gasps, but I have had
>>> ZERO problems using Monokote the way they used to do it. My last few
>>> airplanes have been top hinged using Monokote hinges and I'll continue
>>> to
>>> do
>>> it. Doesn't add any real extra weight. A VERY strong hinge, and looks
>>> great
>>> when covered because you have no gap in your covering. I can send you
>>> pictures of them if you want. Works great and have had no problems with
>>> the
>>> monokote coming loose or cracking. Well over 1000 flights on my Mantis
>>> I've
>>> been currently flying, and plan on using the same method on my new Black
>>> Magics.
>>>
>>> Arch Stafford
>>>
>>>
>>> -----Original Message-----
>>> From: nsrca-discussion-bounces at lists.nsrca.org
>>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Richard
>>> Strickland
>>> Sent: Monday, November 13, 2006 9:38 AM
>>> To: 'NSRCA Mailing List'
>>> Subject: [NSRCA-discussion] Brio Hinges
>>>
>>>
>>> What's the best way to hinge beveled surfaces as on the Brio kit?
>>>
>>> Richard
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>>
>>>
>>> --
>>> Internal Virus Database is out-of-date.
>>> Checked by AVG Free Edition.
>>> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date:
>>> 10/31/2006
>>>
>>>
>>
>>
>>
>> --
>> Internal Virus Database is out-of-date.
>> Checked by AVG Free Edition.
>> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date:
>> 10/31/2006
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>
>>
>> --
>> Internal Virus Database is out-of-date.
>> Checked by AVG Free Edition.
>> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date:
>> 10/31/2006
>>
>>
>
>
>
> --
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date:
> 10/31/2006
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
________________________________
Sponsored Link
Mortgage rates near 39yr lows. $510,000 Mortgage for $1,698/mo - Calculate new house payment <http://www.lowermybills.com/lre/index.jsp?sourceid=lmb-9134-16416&moid=4119>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061115/5fc1ba09/attachment-0001.html
More information about the NSRCA-discussion
mailing list