[NSRCA-discussion] Brio Hinges

Wed Nov 15 09:22:48 AKST 2006

It was '89.
I especially liked centering my maneuvers on the sun, during that NATs.

Dean Pappas
Sr. Design Engineer
Kodeos Communications
111 Corporate Blvd.
South Plainfield, N.J. 07080
(908) 222-7817 phone
(908) 222-2392 fax
d.pappas at kodeos.com

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Richard
Strickland
Sent: Wednesday, November 15, 2006 12:30 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Brio Hinges

Dean,
What year was the Wash. state Nats(Yakima) that most of our radios wouldn't work? '89? Maybe?  It was about the only year I was even half-way competitive--bummer...
RS

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Dean
Pappas
Sent: Wednesday, November 15, 2006 10:59 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Brio Hinges

Hi Rich,
During the "Great Toledo Gang Build" of '87 we set off the smoke alarms in the hotel with the CA fumes!
Remember that Mike?

Dean Pappas
Sr. Design Engineer
Kodeos Communications
111 Corporate Blvd.
South Plainfield, N.J. 07080
(908) 222-7817 phone
(908) 222-2392 fax
d.pappas at kodeos.com

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Richard
Strickland
Sent: Wednesday, November 15, 2006 11:35 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Brio Hinges

I got 'hooked' on RC and Monocoted my first airplane(orange/yellow-looked like crap) in '67 in the dorm.  My neighbors(and room mate) routinely bitched about the odors coming from that room...
RS

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Dean
Pappas
Sent: Wednesday, November 15, 2006 10:17 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Brio Hinges

'Bout the mid-late sixties, I can remember Mom showing Dad and myself how to monokote a corner properly,
before we figured out that working with a clothes iron would build strong muscles!
Seems she was frustrated watching us mess up.
Dean

Dean Pappas
Sr. Design Engineer
Kodeos Communications
111 Corporate Blvd.
South Plainfield, N.J. 07080
(908) 222-7817 phone
(908) 222-2392 fax
d.pappas at kodeos.com

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of wgalligan
Sent: Wednesday, November 15, 2006 10:59 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Brio Hinges

I was around then. Didn't invent It though. I did get chewed out for using
my wife's iron to apply Mono-Cote and Cover All.

WAYNO

----- Original Message ----- 
From: "Amir Neshati"

 <amirneshati at earthlink.net>
To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, November 14, 2006 10:24 PM
Subject: Re: [NSRCA-discussion] Brio Hinges

> Nat,  Monokote hinges were used before your time...You probably aren't old
> enough to remember, in the olden days, around the late '70s & '80s,
> Monokote
> used to include instructions on how to do Monokote hinges .....Wayno was
> around then though, I think he invented the film covering.
>
> Amir
>
>
>
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Nat Penton
> Sent: Tuesday, November 14, 2006 10:02 AM
> To: NSRCA Mailing List
> Subject: Re: [NSRCA-discussion] Brio Hinges
>
> Arch
> Is this for top hinged ails only ?                   Nat
>
> ----- Original Message -----
> From: "Archie Stafford" <rcpattern at stx.rr.com>
> To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
> Sent: Tuesday, November 14, 2006 8:27 AM
> Subject: Re: [NSRCA-discussion] Brio Hinges
>
>
>> Nat,
>>
>> Basically after beveling the surface I put a strip about 1" over the top
>> sealing the gap and holding it in place.  Flip the aileron up and then
>> put
>
>> a
>> piece on the bottom.  Then just cover the entire wing and you end up with
>> an
>> incredibly clean finish on top.
>>
>> Arch
>>
>>
>> -----Original Message-----
>> From: nsrca-discussion-bounces at lists.nsrca.org
>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Nat Penton
>> Sent: Monday, November 13, 2006 10:56 PM
>> To: NSRCA Mailing List
>> Subject: Re: [NSRCA-discussion] Brio Hinges
>>
>> Archie
>> How do you "do" monocote hinges ?           Nat
>>
>> ----- Original Message ----- 
>> From: "Archie Stafford" <rcpattern at stx.rr.com>
>> To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
>> Sent: Monday, November 13, 2006 10:18 AM
>> Subject: Re: [NSRCA-discussion] Brio Hinges
>>
>>
>>> Personally I use Monokote hinges...I know everyone gasps, but I have had
>>> ZERO problems using Monokote the way they used to do it.  My last few
>>> airplanes have been top hinged using Monokote hinges and I'll continue
>>> to
>>> do
>>> it.  Doesn't add any real extra weight. A VERY strong hinge, and looks
>>> great
>>> when covered because you have no gap in your covering.  I can send you
>>> pictures of them if you want.  Works great and have had no problems with
>>> the
>>> monokote coming loose or cracking.  Well over 1000 flights on my Mantis
>>> I've
>>> been currently flying, and plan on using the same method on my new Black
>>> Magics.
>>>
>>> Arch Stafford
>>>
>>>
>>> -----Original Message-----
>>> From: nsrca-discussion-bounces at lists.nsrca.org
>>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Richard
>>> Strickland
>>> Sent: Monday, November 13, 2006 9:38 AM
>>> To: 'NSRCA Mailing List'
>>> Subject: [NSRCA-discussion] Brio Hinges
>>>
>>>
>>> What's the best way to hinge beveled surfaces as on the Brio kit?
>>>
>>> Richard
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>>
>>>
>>> -- 
>>> Internal Virus Database is out-of-date.
>>> Checked by AVG Free Edition.
>>> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date:
>>> 10/31/2006
>>>
>>>
>>
>>
>>
>> -- 
>> Internal Virus Database is out-of-date.
>> Checked by AVG Free Edition.
>> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date:
>> 10/31/2006
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>
>>
>> -- 
>> Internal Virus Database is out-of-date.
>> Checked by AVG Free Edition.
>> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date:
>> 10/31/2006
>>
>>
>
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date:
> 10/31/2006
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion