[NSRCA-discussion] Brio Hinges

[Archie Stafford]

Nat,

Basically after beveling the surface I put a strip about 1" over the top
sealing the gap and holding it in place.  Flip the aileron up and then put a
piece on the bottom.  Then just cover the entire wing and you end up with an
incredibly clean finish on top.  

Arch


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Nat Penton
Sent: Monday, November 13, 2006 10:56 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Brio Hinges

Archie
How do you "do" monocote hinges ?           Nat

----- Original Message ----- 
From: "Archie Stafford" <rcpattern at stx.rr.com>
To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
Sent: Monday, November 13, 2006 10:18 AM
Subject: Re: [NSRCA-discussion] Brio Hinges


> Personally I use Monokote hinges...I know everyone gasps, but I have had
> ZERO problems using Monokote the way they used to do it.  My last few
> airplanes have been top hinged using Monokote hinges and I'll continue to 
> do
> it.  Doesn't add any real extra weight. A VERY strong hinge, and looks 
> great
> when covered because you have no gap in your covering.  I can send you
> pictures of them if you want.  Works great and have had no problems with 
> the
> monokote coming loose or cracking.  Well over 1000 flights on my Mantis 
> I've
> been currently flying, and plan on using the same method on my new Black
> Magics.
>
> Arch Stafford
>
>
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Richard
> Strickland
> Sent: Monday, November 13, 2006 9:38 AM
> To: 'NSRCA Mailing List'
> Subject: [NSRCA-discussion] Brio Hinges
>
>
> What's the best way to hinge beveled surfaces as on the Brio kit?
>
> Richard
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date: 
> 10/31/2006
>
> 



-- 
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date: 10/31/2006

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion