[NSRCA-discussion] Brio Hinges

[Keith Black]

Re: [NSRCA-discussion] Brio HingesGood idea with the jig.

I've moved away from the GP hinge machine as I find it cuts the slots too big. I've found that I can easily do it just using a #11 blade.

Keith
  ----- Original Message ----- 
  From: Mark Atwood 
  To: NSRCA Mailing List 
  Sent: Monday, November 13, 2006 4:06 PM
  Subject: Re: [NSRCA-discussion] Brio Hinges


  Geek

  :)


  On 11/13/06 5:00 PM, "Scott Smith" <js.smith at verizon.net> wrote:


    If you go with CA hinges, make up a little jig as shown in the picture to get all the slots even.  Once covered,  I use the jig again to cut away the covering (that's why it's two sided with the second side a little deeper)  I use the GP hinge machine to cut the initial slot then finish it with a #11 blade.



    -----Original Message-----
    From: nsrca-discussion-bounces at lists.nsrca.org
    [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Richard
    Strickland
    Sent: Monday, November 13, 2006 10:38 AM
    To: 'NSRCA Mailing List'
    Subject: [NSRCA-discussion] Brio Hinges



    What's the best way to hinge beveled surfaces as on the Brio kit?

    Richard

    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 


----------------------------------------------------------------------------
    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion





------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061113/84a47be4/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 16693 bytes
Desc: not available
Url : http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061113/84a47be4/attachment-0001.jpe