[NSRCA-discussion] Glue for EPP foam

[DaveL322 at comcast.net]

Try 3M Scoth Brite Adhesive 4693H.  Very good stuff and can be used in single applications or as contact cement, and generally dry in 5 -15 minutes.  "Goop" (any variety) also works well, but takes a little longer to dry (be warned, don't use Goop on Depron, it may melt the Depron).

Dave

-------------- Original message -------------- 
From: Tom Simes <simestd at netexpress.com> 

> 
> If you haven't worked with EPP much, getting strong and resilient glue 
> joints can be a challenge. I've been using Liquid Nails CLEAR on EPP 
> and have been very happy with it. It takes a while to dry (like over 
> night), but the surrounding foam will fail before the bond and the joint 
> is slightly flexible which makes it very durable. 
> 
> Tom 
> 
> ====================================================================== 
> "Z-80 system stack overflow. Shut 'er down Scotty, the system's 
> sucking mud" - Error message on TRS 80 Model-16B 
> 
> Tom Simes simestd at netexpress.com 
> ====================================================================== 
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061109/868126df/attachment.html