[NSRCA-discussion] Lighter Spinner Adapter

[DoWayne Gould]

Jim
Dubro makes aluminum spinner nuts in several threads. Not sure what thread
you are looking for but they may have what you need.
Dowayne

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jim Woodward
Sent: Wednesday, May 24, 2006 12:45 PM
To: 'NSRCA Mailing List'
Subject: [NSRCA-discussion] Lighter Spinner Adapter

Hi All,

I have a Tru-Turn adapter for the Plett 30/10.  However, I'm also trying to
save weight.  Does anyone have a lighter solution to the TT adapter?  The
spinner in use currently is the ES Composites spinner, with AL backplate and
fiberglass cone.  The total weight of the spinner is about 1.76 oz.  The
spinner cone has the tip recession for the center bolt, just like the TT.

Also, I wouldn't mind having a simple AL round nut/hub to have in the
tool-kit, in case I need to drop the spinner weight plus the adapter weight
- anyone know of a good AL rounded nut?

Thanks,
Jim W.


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion