[NSRCA-discussion] Hysol 9462

[Gray E Fowler]

Stuart

I found it under Industrial section instead of aerospace. What I wanted to 
see was the mix ratio which is 1:1 by volume OR 100:85 by weight. Weight 
is always better if you have a good scale.  9462 sets in 3-4 hours at 75F, 
so your prior application has got to be removed. Clean with acetone or mek 
unless you have a polystyrene foam core airplane, if you do use an 
alcohol...which will be difficult.

Attached is the technical data sheet for this product








Gray Fowler
Principal Chemical Engineer
Composites Engineering
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060515/0b21525f/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: HYSA9462-EN.pdf
Type: application/octet-stream
Size: 15724 bytes
Desc: not available
Url : http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060515/0b21525f/attachment-0001.obj