[NSRCA-discussion] OS140RX needle valve extension

[Ron Lockhart]

Either way will work fine.
Ron Lockhart
----- Original Message ----- 
From: "Ken Thompson" <mrandmrst at comcast.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Sunday, May 14, 2006 8:30 AM
Subject: Re: [NSRCA-discussion] OS140RX needle valve extension


> Or eliminate it all together and use a remote needle valve, comes ready to
> mount.
> ----- Original Message ----- 
> From: "Scott Smith" <js.smith at verizon.net>
> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> Sent: Sunday, May 14, 2006 8:15 AM
> Subject: [NSRCA-discussion] OS140RX needle valve extension
>
>
> >
> > I'm installing this engine in a Brio where a 2.5" needle valve extension
> > (plus the required opening) is something I'd rather avoid.  Anybody have
> > experience with cutting the needle valve body off the back plate and
> > installing it to the airframe?  (engine is out of warranty)
> >
> > Any other ideas?
> >
> > Thanks,
> >
> > Scott
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion