[NSRCA-discussion] OS140RX needle valve extension

[Jay Marshall]

I would not cut at first. Just install a remote needle body and use that
instead of the one on the back plate. If it doesn't work, nothing lost. OS
also has a nice long flex extender for the needle.

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Scott Smith
Sent: Sunday, May 14, 2006 8:15 AM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] OS140RX needle valve extension


I'm installing this engine in a Brio where a 2.5" needle valve extension
(plus the required opening) is something I'd rather avoid.  Anybody have
experience with cutting the needle valve body off the back plate and
installing it to the airframe?  (engine is out of warranty)

Any other ideas?

Thanks,

Scott

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion