[NSRCA-discussion] 160DZ

[Rex LESHER]

Has to one of two things...  Either too much pump pressure, or a partial blockage in the the nozzle, creating too much pressure in the line.

Rex Lesher
  ----- Original Message ----- 
  From: Ed Deaver<mailto:divesplat at yahoo.com> 
  To: NSRCA Mailing List<mailto:nsrca-discussion at lists.nsrca.org> 
  Sent: Sunday, March 26, 2006 2:40 PM
  Subject: [NSRCA-discussion] 160DZ


  Hey everyone.  My best friend is having a real problem with a brand new 160DZ.

  As the engine starts the fuel line from the pump to the needle valve housing blows off, and the engine dies.

  He tried adjusting the pump, and replacing the fuel tubbing to make sure the fit was good.

  Any ideas before he boxes it up and ships it back to YS Performance.

  Is strange as my 160DZ had to go back first time for incorrect installatio of carbuetor (something was in backwards) but has ran flawlessly since.

  thanx

  ed
  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060326/8f723476/attachment.html