[NSRCA-discussion] Painting

Wed Mar 22 06:42:35 AKST 2006

Please send me a copy.  I missed it the first itime around.

Thanks!

Jon Lowe
jonlowe at aol.com

-----Original Message-----
From: David Flynt <dflynt at verizon.net>
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
Sent: Wed, 22 Mar 2006 07:13:41 -0800
Subject: Re: [NSRCA-discussion] Painting

I think I sent to all that requested.  If I missed you, please send me
another email.

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of David
Flynt
Sent: Tuesday, March 21, 2006 6:54 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Painting

I still have the word documents for the four articles.  They focus on
safety, tools, surface prep, and on using PPG concept, which is a two 
part,
single stage polyurethane paint.  I can send them as attachements to 
those
that want them.  I do like the Sata Minijet, and a Badger 150 airbrush, 
but
as others have mentioned the inexpensive chinese touch up gun will work 
just
fine.  I purchased a Sata copy at my paint store for $80, and it 
performs
about as good as the Sata.  Good lighting is far more important than an
expensive gun.

Do what it takes to not breathe in the paint fumes and overspray.

My email is dflynt at verizon.net.

David

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Stuart
Chale
Sent: Tuesday, March 21, 2006 1:01 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Painting

Anyone have a copy they could post?
I would be interested as well (no comments Dean)
I wasn't an NSRCA member back then.
Is there a reason why old K-factors are removed from the NSRCA site?
Thanks,
Stu

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jim 
Woodward
Sent: Tuesday, March 21, 2006 2:45 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Painting

Dave Flynt practically wrote a doctoral thesis on painting and 
published it
in the K-Factor two - three years ago I believe.  He wrote this while 
he was
painting an Alliance I asked him to do.  I would research this article 
and
study it thoroughly.

Thanks,
Jim W.

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dave 
Burton
Sent: Tuesday, March 21, 2006 2:36 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Painting

I'd use the standard just because I don't have experience with HVLP.
I have a $25.00 import automotive touch-up gun and a high buck 
($150-$200)
Binks touch up gun I use to spray airplanes. I can't tell the 
difference in
them. Buy one from Harbor Freight or similar outfits and use at 35-50 
psi
(depending on material) with your compressor. I think the touch up guns 
are
easier to use than an airbrush you can get through a lot quicker.
Dave Burton

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Michael
Laggis
Sent: Tuesday, March 21, 2006 1:48 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Painting

I have a compressor.  I do not have a spray gun yet.  From my 
understanding
there are 2 types of guns "Standard and HPLV".  Which is "better or 
easier"
to use?

Michael

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John 
Ferrell
Sent: Tuesday, March 21, 2006 9:41 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Painting

The secret is in the paint. Concept is so good you can do a great job 
even
with a cheap external mix airbrush like the the one Harbor freight puts 
on
sale for less than $5.  If you use one of those make sure you regulate 
the
air pressure to 20 pounds or less. Practice on old milk jugs and plastic
containers.  The down side is that you will have to hurry with the 
airbrush
but the small paint container will help you keep the weight down. The 
paint
will weigh the same in the can as it does on the airplane.
Don't get the idea you can sand Concept off and do it again. Sanding 
Concept
is something to avoid!

John Ferrell
http://DixieNC.US

----- Original Message -----
From: "Michael Laggis" <fishgod at pobox.mtaonline.net>
To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, March 21, 2006 1:05 PM
Subject: [NSRCA-discussion] Painting

>
> All,
> Are there any good sources for painting a plane.  I have done a very 
small
> bit of painting with a gun.  My only other experience painting is 
spraying

> 5
> house exteriors.  I will be using the Flying Colors (PPG Concept 
Urethane)
> from Radio South.  I saw at Sears a small touch up gun.  Would this 
type
> of
> gun work for this type of painting.  Any help would be appreciated.
>
> Regards
> Michael Laggis
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion