[NSRCA-discussion] Painting

[Stuart Chale]

Anyone have a copy they could post?
I would be interested as well (no comments Dean)
I wasn't an NSRCA member back then.
Is there a reason why old K-factors are removed from the NSRCA site?
Thanks,
Stu

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jim Woodward
Sent: Tuesday, March 21, 2006 2:45 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Painting

Dave Flynt practically wrote a doctoral thesis on painting and published it
in the K-Factor two - three years ago I believe.  He wrote this while he was
painting an Alliance I asked him to do.  I would research this article and
study it thoroughly.

Thanks,
Jim W.


 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dave Burton
Sent: Tuesday, March 21, 2006 2:36 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Painting

I'd use the standard just because I don't have experience with HVLP.
I have a $25.00 import automotive touch-up gun and a high buck ($150-$200)
Binks touch up gun I use to spray airplanes. I can't tell the difference in
them. Buy one from Harbor Freight or similar outfits and use at 35-50 psi
(depending on material) with your compressor. I think the touch up guns are
easier to use than an airbrush you can get through a lot quicker.
Dave Burton

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Michael
Laggis
Sent: Tuesday, March 21, 2006 1:48 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Painting


I have a compressor.  I do not have a spray gun yet.  From my understanding
there are 2 types of guns "Standard and HPLV".  Which is "better or easier"
to use?

Michael

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John Ferrell
Sent: Tuesday, March 21, 2006 9:41 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Painting

The secret is in the paint. Concept is so good you can do a great job even
with a cheap external mix airbrush like the the one Harbor freight puts on
sale for less than $5.  If you use one of those make sure you regulate the
air pressure to 20 pounds or less. Practice on old milk jugs and plastic
containers.  The down side is that you will have to hurry with the airbrush
but the small paint container will help you keep the weight down. The paint
will weigh the same in the can as it does on the airplane.
Don't get the idea you can sand Concept off and do it again. Sanding Concept
is something to avoid!

John Ferrell
http://DixieNC.US

----- Original Message -----
From: "Michael Laggis" <fishgod at pobox.mtaonline.net>
To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, March 21, 2006 1:05 PM
Subject: [NSRCA-discussion] Painting


>
> All,
> Are there any good sources for painting a plane.  I have done a very small
> bit of painting with a gun.  My only other experience painting is spraying

> 5
> house exteriors.  I will be using the Flying Colors (PPG Concept Urethane)
> from Radio South.  I saw at Sears a small touch up gun.  Would this type
> of
> gun work for this type of painting.  Any help would be appreciated.
>
> Regards
> Michael Laggis
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion