[NSRCA-discussion] Partner

[Verne Koester]

Thanks David. The Smaragd calls for the same location with the same results which is why I asked. I was figuring on a location at tube center or slightly behind it based on my Smaragd experience. Sounds like that's just about right.

Verne
  ----- Original Message ----- 
  From: David Flynt 
  To: NSRCA Mailing List 
  Sent: Wednesday, March 15, 2006 12:18 PM
  Subject: Re: [NSRCA-discussion] Partner


  Verne, 

  Initially I set it up per the instructions 24 mm behind the center of the tube.  It was much too tail heavy.  I even emailed PL for confirmation before building, and he confirmed this location.  So I put my elevator servos in the stabs.  Then I talked with Tony Frackowiac, and I believe he said that Quique set it at the middle of the tube.  Tony was at the middle of the tube or leading edge of it.  I ended up going to a single elevator servo setup, which got my CG to the middle of the tube.  That's where I like it.

  David
    -----Original Message-----
    From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Verne Koester
    Sent: Tuesday, March 14, 2006 8:43 PM
    To: NSRCA
    Subject: [NSRCA-discussion] Partner


    Any recommendations on the CG location on a PLF Concept Partner?

    Thanks,
    Verne Koester


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060315/5f818578/attachment.html