[NSRCA-discussion] Servos

[DaveL322 at comcast.net]

Stu,

The JR servos will work with the Futaba RX, and you'll find quite a few guys using JR servos with non JR RX/TX.

My preferred setup -
Ail - 2x9411sa
Ele - 1x8417sa (convert metal gears to nylon using 8231 gearset).
Rud - 1x8411sa
Thr - 1x3421sa

You can certainly find stronger servos that are of the same approximate size/weight, but I've run them back to back with the above and on a 2M pattern plane, more servo than the above is just more weight and expense.

Since the day of the analog 9101, pattern servos now are digital - I wouldn't go with anything that is not digital.

Regards,

Dave Lockhart, Team JR
DaveL322 at comcast.net


-------------- Original message -------------- 
From: Stuart Chale <schale at optonline.net> 

 
Ok a basic question.  Which servos do you like to use on your 2M planes.  I am looking for Futaba or Futaba compatible models.  The last quality servos I bought were 9101's   Technology has advanced since I have been away and the planes have gotten bigger J
 
Thanks,
Stuart C
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060308/8f4c04e9/attachment.html 
-------------- next part --------------
An embedded message was scrubbed...
From: Stuart Chale <schale at optonline.net>
Subject: [NSRCA-discussion] Servos
Date: Wed, 8 Mar 2006 17:09:44 +0000
Size: 693
Url: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060308/8f4c04e9/attachment.mht