[NSRCA-discussion] First day out with OS 140RX (somewhat long)

[brett terry]

Dave,

I have a YS 1.20AC (I think) with a Hatori pipe in my 2m plane.  If I were
to upgrade to a new motor I would strongly consider 2-stroke for the price
factor alone.  I think the YS 1.60 looks like a tremendous motor, but it is
a lot of money in upfront cost as well as fuel.

What would you recommend?  The plane weighs 10#4oz now.  Should I look at
the OS, Mintor, or Webra?

Just curious,

Brett

On 3/2/06, David Lockhart <DaveL322 at comcast.net> wrote:
>
> I agree that a good running YS is a great glow powerplant for pattern, and
> the folks at YS Performance provide great service to the YS faithful.  And
> to get solid performance, you need only to slap on any one of a number of
> headers and mufflers at pretty much any length, dump lots of 30% nitro low
> viz oil fuel, bolt on a prop that will hit sufficient RPM to bust the
> noisemeter at 80% stick, and set the needle.  Good power, good torque, and
> nice throttle curve are the likely result - along with plenty of noise and
> vibration (relative to a 2C).
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060302/e6a2aeca/attachment.html