[NSRCA-discussion] OS 140 header/ for Focus2

[Ed Miller]

Carl Mueller makes a header specifically for the Focus 2.  Between the header and pipe I have a 2 inch piece of aluminum tubing. If I remember correctly it is 24 1/4" straight line distance from the glow plug to the 1st baffle in the pipe.  If you measure along the curve of the header the distance is probably close to 26 inches as the header has a 2 3/4" drop. The stock tunnel is long enough to move the pipe back at least another 2 inches.  The ES 2C140S90 is only 20 inches long, 2 inches in diameter and weighs 88 grams. 
Ed M.
  ----- Original Message ----- 
  From: Glenn Hatfield 
  To: nsrca-discuss list 
  Sent: Sunday, June 18, 2006 7:23 PM
  Subject: [NSRCA-discussion] OS 140 header/ for Focus2


  What header are you using for an OS 140RX on a Focus 2 with an ES CF pipe?  Is the pipe tunnel too short for this pipe on this model?

  What length are you using?

  Randy


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060618/0c9315fb/attachment.html